Network Working Group                                           J. Boyer
Request for Comments: 3741                            PureEdge Solutions
Category: Informational                                  D. Eastlake 3rd
                                                                Motorola
                                                               J. Reagle
                                                                     W3C
                                                              March 2004


              Exclusive XML Canonicalization, Version 1.0

Status of this Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2004).  All Rights Reserved.

Abstract

   Canonical XML specifies a standard serialization of XML that, when
   applied to a subdocument, includes the subdocument's ancestor context
   including all of the namespace declarations and attributes in the
   "xml:" namespace.  However, some applications require a method which,
   to the extent practical, excludes ancestor context from a
   canonicalized subdocument.  For example, one might require a digital
   signature over an XML payload (subdocument) in an XML message that
   will not break when that subdocument is removed from its original
   message and/or inserted into a different context.  This requirement
   is satisfied by Exclusive XML Canonicalization.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  2
       1.1.  Terminology. . . . . . . . . . . . . . . . . . . . . . .  2
       1.2.  Applications . . . . . . . . . . . . . . . . . . . . . .  4
       1.3.  Limitations. . . . . . . . . . . . . . . . . . . . . . .  5
   2.  The Need for Exclusive XML Canonicalization. . . . . . . . . .  5
       2.1.  A Simple Example . . . . . . . . . . . . . . . . . . . .  6
       2.2.  General Problems with re-Enveloping. . . . . . . . . . .  7
   3.  Specification of Exclusive XML Canonicalization. . . . . . . .  8
       3.1.  Constrained Implementation (non-normative) . . . . . . .  9
   4.  Use in XML Security. . . . . . . . . . . . . . . . . . . . . . 10
   5.  Security Considerations. . . . . . . . . . . . . . . . . . . . 12
       5.1.  Target Context . . . . . . . . . . . . . . . . . . . . . 12



Boyer, et al.                Informational                      [Page 1]


RFC 3741             Exclusive XML Canonicalization           March 2004


       5.2.  'Esoteric' Node-sets . . . . . . . . . . . . . . . . . . 13
   6.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 13
       6.1.  Normative References . . . . . . . . . . . . . . . . . . 13
       6.2.  Informative References . . . . . . . . . . . . . . . . . 14
   7.  Acknowledgements (Informative) . . . . . . . . . . . . . . . . 14
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 15
   Full Copyright Statement . . . . . . . . . . . . . . . . . . . . . 16

1.  Introduction

   The XML Recommendation [XML] specifies the syntax of a class of
   objects called XML documents.  The Namespaces in XML Recommendation
   [XML-NS] specifies additional syntax and semantics for XML documents.
   It is normal for XML documents and subdocuments which are equivalent
   for the purposes of many applications to differ in their physical
   representation.  For example, they may differ in their entity
   structure, attribute ordering, and character encoding.  The goal of
   this specification is to establish a method for serializing the XPath
   node-set representation of an XML document or subset such that:

      1. The node-set is minimally affected by any XML context which has
         been omitted.
      2. The canonicalization of a node-set representing well-balanced
         XML [XML-Fragment] will be unaltered by further applications of
         exclusive canonicalization.
      3. It can be determined whether two node-sets are identical except
         for transformations considered insignificant by this
         specification under [XML, XML-NS].

   An understanding of the Canonical XML Recommendation [XML-C14N] is
   required.

   The World Wide Web Consortium Recommendation corresponding to this
   RFC is at: http://www.w3.org/TR/xml-exc-c14n.  Errata are located at
   http://www.w3.org/2002/07/xml-exc-c14n-errata.

1.1.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [Keywords].

   The XPath 1.0 Recommendation [XPath] defines the term node-set and
   specifies a data model for representing an input XML document as a
   set of nodes of various types (element, attribute, namespace, text,
   comment, processing instruction, and root).  The nodes are included
   in or excluded from a node-set based on the evaluation of an
   expression.  Within this specification and [XML-C14N], a node-set is



Boyer, et al.                Informational                      [Page 2]


RFC 3741             Exclusive XML Canonicalization           March 2004


   used to directly indicate whether or not each node should be rendered
   in the canonical form (in this sense, it is used as a formal
   mathematical set).  A node that is excluded from the set is not
   rendered in the canonical form being generated, even if its parent
   node is included in the node-set.  However, an omitted node may still
   impact the rendering of its descendants (e.g., by affecting the
   namespace context of the descendants).

   A document subset is a portion of an XML document indicated by an
   XPath node-set that may not include all of the nodes in the document.
   As defined in [XPath] every node (e.g., element, attribute, and
   namespace), has exactly one parent, which is either an element node
   or the root node.  An apex node is an element node in a document
   subset having no element node ancestor in the document subset.  An
   orphan node is an element node whose parent element node is not in
   the document subset.  The output parent of an orphan node that is not
   an apex node is the nearest ancestor element of the orphan node that
   is in the document subset; an apex node has no output parent.  The
   output parent of a non-orphan node is the parent of the node.  An
   output ancestor is any ancestor element node in the document subset.

   For example given a document tree with three generations under the
   root node A and where capitalization denotes the node is in the
   document subset (A,E,G).

   Pictorial Representation:

     [diagram of nodes,
      http://www.w3.org/TR/xml-exc-c14n/exc-c14n.png]

   Textual Representation:

     A-+-b
       `-c-+-d
           `-E-+-f
               `-G
   The following characteristics apply:

      *  A is an apex node, output parent of E, and output ancestor of
         (E,G);
      *  E is an orphan node and the output parent of G.

   An element E in a document subset visibly utilizes a namespace
   declaration, i.e., a namespace prefix P and bound value V, if E or an
   attribute node in the document subset with parent E has a qualified
   name in which P is the namespace prefix.  A similar definition





Boyer, et al.                Informational                      [Page 3]


RFC 3741             Exclusive XML Canonicalization           March 2004


   applies for an element E in a document subset that visibly utilizes
   the default namespace declaration, which occurs if E has no namespace
   prefix.

   The namespace axis of an element contains nodes for all non-default
   namespace declarations made within the element as well as non-default
   namespace declarations inherited from ancestors of the element.  The
   namespace axis also contains a node representing the default
   namespace if it is not the empty string, whether the default
   namespace was declared within the element or by an ancestor of the
   element.  Any subset of the nodes in a namespace axis can be included
   in a document subset.

   The method of canonicalization described in this specification
   receives an InclusiveNamespaces PrefixList parameter, which lists
   namespace prefixes that are handled in the manner described by the
   Canonical XML Recommendation [XML-C14N].

   The exclusive canonical form of a document subset is a physical
   representation of the XPath node-set, as an octet sequence, produced
   by the method described in this specification.  It is as defined in
   the Canonical XML Recommendation [XML-C14N] except for the changes
   summarized as follows:

      *  attributes in the XML namespace, such as xml:lang and xml:space
         are not imported into orphan nodes of the document subset, and
      *  namespace nodes that are not on the InclusiveNamespaces
         PrefixList are expressed only in start tags where they are
         visible and if they are not in effect from an output ancestor
         of that tag.

   The term exclusive canonical XML refers to XML that is in exclusive
   canonical form.  The exclusive XML canonicalization method is the
   algorithm defined by this specification that generates the exclusive
   canonical form of a given XML document subset.  The term exclusive
   XML canonicalization refers to the process of applying the exclusive
   XML canonicalization method to an XML document subset.

1.2.  Applications

   The applications of Exclusive XML Canonicalization are very similar
   to those for Canonical XML [XML-C14N].  However, exclusive
   canonicalization, or equivalent means of excluding most XML context,
   is necessary for signature applications where the XML context of
   signed XML will change.  This sort of change is typical of many
   protocol applications.





Boyer, et al.                Informational                      [Page 4]


RFC 3741             Exclusive XML Canonicalization           March 2004


   Note that in the case of the SignedInfo element of [XML-DSig], the
   specification of an appropriate canonicalization method is the only
   technique available to protect the signature from insignificant
   changes in physical form and changes in XML context.

1.3.  Limitations

   Exclusive XML Canonicalization has the limitations of Canonical XML
   [XML-C14N] plus two additional limitations as follows:

      1. The XML being canonicalized may depend on the effect of XML
         namespace attributes, such as xml:lang, xml:space, and xml:base
         appearing in ancestor nodes.  To avoid problems due to the
         non-importation of such attributes into an enveloped document
         subset, either they MUST be explicitly given in a node of the
         XML document subset being canonicalized where their effect is
         needed or which is an ancestor of the node where their effect
         is needed or they MUST always be declared with an equivalent
         value in every context in which the XML document subset will be
         interpreted.
      2. Applications that use the XML being canonicalized may depend on
         the effect of XML namespace declarations where the namespace
         prefix being bound is not visibly utilized.  An example would
         be an attribute whose value is an XPath expression and whose
         evaluation therefore depends upon namespace prefixes referenced
         in the expression.  Or, an attribute value might be considered
         a QName [XML-NS] by some applications, but it is only a
         string-value to XPath:

         <number xsi:type="xsd:decimal">10.09</number>.

      To avoid problems with such namespace declarations,

      o  the XML MUST be modified so that use of the namespace prefix
         involved is visible, or
      o  the namespace declarations MUST appear and be bound to the same
         values in every context in which the XML will be interpreted,
         or
      o  the prefixes for such namespaces MUST appear in the
         InclusiveNamespaces PrefixList.

2.  The Need for Exclusive XML Canonicalization

   In some cases, particularly for signed XML in protocol applications,
   there is a need to canonicalize a subdocument in such a way that it
   is substantially independent of its XML context.  This is because, in
   protocol applications, it is common to envelope XML in various layers
   of message or transport elements, to strip off such enveloping, and



Boyer, et al.                Informational                      [Page 5]


RFC 3741             Exclusive XML Canonicalization           March 2004


   to construct new protocol messages, parts of which were extracted
   from different messages previously received.  If the pieces of XML in
   question are signed, they need to be canonicalized in a way such that
   these operations do not break the signature but the signature still
   provides as much security as can be practically obtained.

2.1.  A Simple Example

   As a simple example of the type of problem that changes in XML
   context can cause for signatures, consider the following document:

      <n1:elem1 xmlns:n1="http://b.example">
          content
      </n1:elem1>

   this is then enveloped in another document:

      <n0:pdu xmlns:n0="http://a.example">
         <n1:elem1 xmlns:n1="http://b.example">
             content
         </n1:elem1>
      </n0:pdu>

   The first document above is in canonical form.  But assume that
   document is enveloped as in the second case.  The subdocument with
   elem1 as its apex node can be extracted from this second case with an
   XPath expression such as:

    (//. | //@* | //namespace::*)[ancestor-or-self::n1:elem1]

   The result of applying Canonical XML to the resulting XPath node-set
   is the following (except for line wrapping to fit this document):

      <n1:elem1 xmlns:n0="http://a.example"
                xmlns:n1="http://b.example">
          content
      </n1:elem1>

   Note that the n0 namespace has been included by Canonical XML because
   it includes namespace context.  This change which would break a
   signature over elem1 based on the first version.










Boyer, et al.                Informational                      [Page 6]


RFC 3741             Exclusive XML Canonicalization           March 2004


2.2.  General Problems with re-Enveloping

   As a more complete example of the changes in canonical form that can
   occur when the enveloping context of a document subset is changed,
   consider the following document:

      <n0:local xmlns:n0="foo:bar"
                xmlns:n3="ftp://example.org">
         <n1:elem2 xmlns:n1="http://example.net"
                   xml:lang="en">
             <n3:stuff xmlns:n3="ftp://example.org"/>
         </n1:elem2>
      </n0:local>

   And the following which has been produced by changing the enveloping
   of elem2:

      <n2:pdu xmlns:n1="http://example.com"
              xmlns:n2="http://foo.example"
              xml:lang="fr"
              xml:space="retain">

         <n1:elem2 xmlns:n1="http://example.net"
                   xml:lang="en">
             <n3:stuff xmlns:n3="ftp://example.org"/>
         </n1:elem2>
      </n2:pdu>

   Assume an XPath node-set produced from each case by applying the
   following XPath expression:

    (//. | //@* | //namespace::*)[ancestor-or-self::n1:elem2]

   Applying Canonical XML to the node-set produced from the first
   document yields the following serialization (except for line wrapping
   to fit in this document):

      <n1:elem2 xmlns:n0="foo:bar"
                xmlns:n1="http://example.net"
                xmlns:n3="ftp://example.org"
                xml:lang="en">
          <n3:stuff></n3:stuff>
      </n1:elem2>








Boyer, et al.                Informational                      [Page 7]


RFC 3741             Exclusive XML Canonicalization           March 2004


   However, although elem2 is represented by the same octet sequence in
   both pieces of external XML above, the Canonical XML version of elem2
   from the second case would be (except for line wrapping so it will
   fit into this document) as follows:

     <n1:elem2 xmlns:n1="http://example.net"
                xmlns:n2="http://foo.example"
                xml:lang="en"
                xml:space="retain">
          <n3:stuff xmlns:n3="ftp://example.org"></n3:stuff>
      </n1:elem2>

   Note that the change in context has resulted in lots of changes in
   the subdocument as serialized by the inclusive Canonical XML [XML-
   C14N].  In the first example, n0 had been included from the context
   and the presence of an identical n3 namespace declaration in the
   context had elevated that declaration to the apex of the
   canonicalized form.  In the second example, n0 has gone away but n2
   has appeared, n3 is no longer elevated, and an xml:space declaration
   has appeared, due to changes in context.  But not all context changes
   have effect.  In the second example, the presence at ancestor nodes
   of an xml:lang and n1 prefix namespace declaration have no effect
   because of existing declarations at the elem2 node.

   On the other hand, using Exclusive XML Canonicalization as specified
   herein, the physical form of elem2 as extracted by the XPath
   expression above is (except for line wrapping so it will fit into
   this document) as follows:

      <n1:elem2 xmlns:n1="http://example.net"
                xml:lang="en">
          <n3:stuff xmlns:n3="ftp://example.org"></n3:stuff>
      </n1:elem2>

   in both cases.

3.  Specification of Exclusive XML Canonicalization

   The data model, processing, input parameters, and output data for
   Exclusive XML Canonicalization are the same as for Canonical XML
   [XML-C14N] with the following exceptions:

      1. Canonical XML applied to a document subset requires the search
         of the ancestor nodes of each orphan element node for
         attributes in the XML namespace, such as xml:lang and
         xml:space.  These are copied into the element node except if a
         declaration of the same attribute is already in the attribute
         axis of the element (whether or not it is included in the



Boyer, et al.                Informational                      [Page 8]


RFC 3741             Exclusive XML Canonicalization           March 2004


         document subset).  This search and copying are omitted from the
         Exclusive XML Canonicalization method.
      2. The Exclusive XML Canonicalization method may receive an
         additional, possibly null, parameter InclusiveNamespaces
         PrefixList containing a list of namespace prefixes and/or a
         token indicating the presence of the default namespace.  All
         namespace nodes appearing on this list are handled as provided
         in Canonical XML [XML-C14N].
      3. A namespace node N with a prefix that does not appear in the
         InclusiveNamespaces PrefixList is rendered if all of the
         conditions are met:
         1. Its parent element is in the node-set, and
         2. it is visibly utilized by its parent element, and
         3. the prefix has not yet been rendered by any output ancestor,
            or the nearest output ancestor of its parent element that
            visibly utilizes the namespace prefix does not have a
            namespace node in the node-set with the same namespace
            prefix and value as N.
      4. If the token representing the default namespace is not present
         in InclusiveNamespaces PrefixList, then the rules for rendering
         xmlns="" are changed as follows.  When canonicalizing the
         namespace axis of an element E that is in the node-set, output
         xmlns="" if and only if all of the conditions are met:
         1. E visibly utilizes the default namespace (i.e., it has no
            namespace prefix), and
         2. it has no default namespace node in the node-set, and
         3. the nearest output ancestor of E that visibly utilizes the
            default namespace has a default namespace node in the node-
            set.  (This step for xmlns="" is necessary because it is not
            represented in the XPath data model as a namespace node, but
            as the absence of a namespace node; see  Section 4.7
            Propagation of Default Namespace Declaration in Document
            Subsets [XML-C14N].)

3.1.  Constrained Implementation (non-normative)

   The following is a (non-normative) method for implementing the
   Exclusive XML Canonicalization method for many straightforward cases
   -- it assumes a well-formed subset and that if an element is in the
   node-set, so is all of its namespace axis; if the element is not in
   the subset, neither is its namespace axis.

      1. Recursively process the entire tree (from which the XPath
         node-set was selected) in document order starting with the
         root. (The operation of copying ancestor xml: namespace
         attributes into output apex element nodes is not done.)
      2. If the node is not in the XPath subset, continue to process its
         children element nodes recursively.



Boyer, et al.                Informational                      [Page 9]


RFC 3741             Exclusive XML Canonicalization           March 2004


      3. If the element node is in the XPath subset then output the node
         in accordance with Canonical XML except for namespace nodes
         which are rendered as follows:

         1. ns_rendered is a copy of a dictionary, off the top of the
            state stack, of prefixes and their values which have already
            been rendered by an output ancestor of the namespace node's
            parent element.
         2. Render each namespace node if and only if all of the
            conditions are met:
            1. it is visibly utilized by the immediate parent element or
               one of its attributes, or is present in
               InclusiveNamespaces PrefixList, and
            2. its prefix and value do not appear in ns_rendered.
         3. Render xmlns="" if and only if all of the conditions are
            met:
            1. The default namespace is visibly utilized by the
               immediate parent element node, or the default prefix
               token is present in InclusiveNamespaces PrefixList, and
            2. the element does not have a namespace node in the node-
               set declaring a value for the default namespace, and
            3. the default namespace prefix is present in the dictionary
               ns_rendered.
         4. Insert all the rendered namespace nodes (including xmlns="")
            into the ns_rendered dictionary, replacing any existing
            entries.  Push ns_rendered onto the state stack and recurse.
         5. After the recursion returns, pop the state stack.

4.  Use in XML Security

   Exclusive Canonicalization may be used as a Transform or
   CanonicalizationMethod algorithm in XML Digital Signature [XML-DSig]
   and XML Encryption [XML-Enc].

   Identifier:
        http://www.w3.org/2001/10/xml-exc-c14n#

        http://www.w3.org/2001/10/xml-exc-c14n#WithComments

   Just as with [XML-C14N] one may use the "#WithComments" parameter to
   include the serialization of XML comments.  This algorithm also takes
   an optional explicit parameter of an empty InclusiveNamespaces
   element with a PrefixList attribute.  The value of this attribute is
   a white space delimited list of namespace prefixes, and where
   #default indicates the default namespace, to be handled as per [XML-
   C14N].  The list is in NMTOKENS format (a white space separated
   list).  For example:




Boyer, et al.                Informational                     [Page 10]


RFC 3741             Exclusive XML Canonicalization           March 2004


      <ds:Transform
         Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#">
         <ec:InclusiveNamespaces PrefixList="dsig soap #default"
             xmlns:ec="http://www.w3.org/2001/10/xml-exc-c14n#"/>
      </ds:Transform>

   indicates the exclusive canonicalization transform, but that
   namespaces with prefix "dsig" or "soap" and default namespaces should
   be processed according to [XML-C14N].

      Schema Definition (expressed in [XML-schema]):

      <?xml version="1.0" encoding="utf-8"?>
      <!DOCTYPE schema
        PUBLIC "-//W3C//DTD XMLSchema 200102//EN"
               "http://www.w3.org/2001/XMLSchema.dtd"
       [
         <!ATTLIST schema xmlns:ec CDATA
                   #FIXED 'http://www.w3.org/2001/10/xml-exc-c14n#'>
         <!ENTITY ec 'http://www.w3.org/2001/10/xml-exc-c14n#'>
         <!ENTITY % p ''>
         <!ENTITY % s ''>
        ]>

      <schema xmlns="http://www.w3.org/2001/XMLSchema"
              xmlns:ec="http://www.w3.org/2001/10/xml-exc-c14n#"
              targetNamespace="http://www.w3.org/2001/10/xml-exc-c14n#"
              version="0.1" elementFormDefault="qualified">

        <element name="InclusiveNamespaces"
                 type="ec:InclusiveNamespaces"/>
        <complexType name="InclusiveNamespaces">
           <attribute name="PrefixList" type="NMTOKENS"/>
        </complexType>
      </schema>

      DTD:
      <!ELEMENT InclusiveNamespaces    EMPTY >
      <!ATTLIST InclusiveNamespaces
         PrefixList    NMTOKENS    #REQUIRED >











Boyer, et al.                Informational                     [Page 11]


RFC 3741             Exclusive XML Canonicalization           March 2004


5.  Security Considerations

   This specification is used to serialize an XPath node-set under
   certain assumptions given in [XML-C14N] and this specification.
   Three such examples include:

   1. implementations of [XML-C14N] and this specification do not render
      an XML declaration;
   2. implementations of this specification only render attributes from
      the "XML" namespace (e.g., xml:lang, xml:space, and xml:base) when
      they are in the subset being serialized;
   3. implementations of this specification do not consider the
      appearance of a namespace prefix within an attribute value to be
      visibly utilized.

   While such choices are consistent with other XML specifications and
   satisfy the Working Group's application requirements it is important
   that an XML application carefully construct its transforms such that
   the result is meaningful and unambiguous in its application context.
   In addition to this section, the Limitations of this specification,
   the Resolutions of [XML-C14N], and the Security Considerations of
   [XML-DSig] should be carefully attended to.

5.1.  Target Context

   The requirement of this specification is to satisfy applications that
   "require a method which, to the extent practical, excludes ancestor
   context from a canonicalized subdocument." Given a fragment being
   removed from its source instance, this specification satisfies this
   requirement by excluding from the fragment any context from its
   ancestors that is not utilized.  Consequently, a signature [XML-DSig]
   over that fragment will remain valid in its source context, removed
   from the source context, and even in a new target context.  However,
   this specification does not insulate the fragment against confused
   interpretation in a target context.

   For example, if the <Foo/> element is signed in its source instance
   of <Bar/><Foo/></Bar> and then removed and placed in the target
   instance <Baz xmlns="http://example.org/bar"/><Foo/></Baz>, the
   signature should still be valid, but won't be if <Foo/> is
   interpreted as belonging to the http://example.org/bar namespace:
   this is dependent on how nodes are processed.

   This specification does not define mechanisms of removing, inserting,
   and "fixing up" a node-set. (For an example of this sort of
   specification, see the processing required of Creating the Result
   Infoset (section 4.5) when an [XInclude] is performed.) Instead,
   applications must carefully specify the XML (i.e., source, fragment,



Boyer, et al.                Informational                     [Page 12]


RFC 3741             Exclusive XML Canonicalization           March 2004


   and target) or define the node-set processing (i.e., removal,
   replacement, and insertion) with respect to default namespace
   declarations (e.g., xmlns="") and XML attributes (e.g., xml:lang,
   xml:space, and xml:base).

5.2.  'Esoteric' Node-sets

   Consider an application that might use this specification or [XML-
   C14N] to serialize a single attribute node.  An implementation of
   either specification will not emit a namespace declaration for that
   single attribute node.  Consequently, a "carefully constructed"
   transform should create a node-set containing the attribute and the
   relevant namespace declaration for serialization.

   This example is provided to caution that as one moves beyond well-
   formed [XML] and then well-balanced XML [XML-Fragment], it becomes
   increasingly difficult to create a result that "is meaningful and
   unambiguous in its application context."

6.  References

6.1.  Normative References

   [Keywords]     Bradner, S., "Key words for use in RFCs to Indicate
                  Requirement Levels", BCP 14, RFC 2119, March 1997.

   [XML]          Extensible Markup Language (XML) 1.0 (Second Edition).
                  T.  Bray, E.  Maler, J. Paoli, and C. M. Sperberg-
                  McQueen.  W3C Recommendation, October 2000.  Available
                  at http://www.w3.org/TR/2000/REC-xml-20001006

   [XML-C14N]     Boyer, J., "Canonical XML", RFC 3076, March 2001.
                  Also a W3C Recommendation available at
                  http://www.w3.org/TR/2001/REC-xml-c14n-20010315

   [XML-NS]       Namespaces in XML.  T.  Bray, D. Hollander, and A.
                  Layman.  W3C Recommendation, January 1999.  Available
                  at http://www.w3.org/TR/1999/REC-xml-names-19990114/

   [XML-schema]   XML Schema Part 1: Structures D. Beech, M. Maloney, N.
                  Mendelsohn, and H. Thompson.  W3C Recommendation, May
                  2001.  Available at http://www.w3.org/TR/2001/REC-
                  xmlschema-2-20010502/

   [XPath]        XML Path Language (XPath) Version 1.0. J. Clark and S.
                  DeRose.  W3C Recommendation, November 1999.  Available
                  at http://www.w3.org/TR/1999/REC-xpath-19991116




Boyer, et al.                Informational                     [Page 13]


RFC 3741             Exclusive XML Canonicalization           March 2004


6.2.  Informative References

   [URI]          Berners-Lee, T., Fielding, R. and L. Masinter,
                  "Uniform Resource Identifiers (URI): Generic Syntax",
                  RFC 2396, August 1998.

   [XInclude]     XML Inclusions (XInclude) Version 1.0. J. Marsh, and
                  D.  Orchad.  W3C Candidate Recommendation, February
                  2002.  Available at http://www.w3.org/TR/2002/CR-
                  xinclude-20020221/

   [XML-DSig]     Eastlake, D., Reagle, J. and D. Solo, "XML-Signature
                  Syntax and Processing", RFC 3275, March 2002.
                  Available at http://www.w3.org/TR/2002/REC-xmldsig-
                  core-20020212/

   [XML-Enc]      XML Encryption Syntax and Processing.  D.  Eastlake,
                  and J.  Reagle.  W3C Candidate Recommendation, March
                  2002.  Available at http://www.w3.org/TR/2002/CR-
                  xmlenc-core-20020304/

   [XML-Fragment] XML Fragment Interchange.  P. Grosso, and D.
                  Veillard.  W3C Candidate Recommendation, February
                  2001.  Available at http://www.w3.org/TR/2001/CR-xml-
                  fragment-20010212

7.  Acknowledgements (Informative)

   The following people provided valuable feedback that improved the
   quality of this specification:

        * Merlin Hughes, Baltimore
        * Thomas Maslen, DSTC
        * Paul Denning, MITRE
        * Christian Geuer-Pollmann, University Siegen
        * Bob Atkinson, Microsoft















Boyer, et al.                Informational                     [Page 14]


RFC 3741             Exclusive XML Canonicalization           March 2004


Authors' Addresses

   John Boyer
   PureEdge Solutions Inc.
   4396 West Saanich Rd.
   Victoria, BC, Canada V8Z 3E9

   Phone: +1-888-517-2675
   EMail: jboyer@PureEdge.com

   Donald E. Eastlake 3rd
   Motorola
   155 Beaver Street
   Milford, MA 01757 USA

   Phone: +1-508-634-2066 (h)
          +1-508-786-7554 (w)
   EMail: Donald.Eastlake@motorola.com

   Joseph M. Reagle Jr., W3C
   Massachusetts Institute of Technology
   Laboratory for Computer Science
   NE43-350, 545 Technology Square
   Cambridge, MA 02139

   Phone: +1-617-258-7621
   EMail: reagle@mit.edu
























Boyer, et al.                Informational                     [Page 15]


RFC 3741             Exclusive XML Canonicalization           March 2004


Full Copyright Statement

   Copyright (C) The Internet Society (2004).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78 and
   except as set forth therein, the authors retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.









Boyer, et al.                Informational                     [Page 16]